[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 9/10/2014 10:02:51 AM For Israel Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] € This unit also supports the intelligent personal assistant function of iPhone. NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 1 Press 2 Turn the volume knob to select [CALL HISTORY], then press the knob. 5 Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then press the knob. DELETE ALL: All names or phone numbers in [CALL HISTORY] in step 2 is deleted. VOICE BATT* SIGNAL* Speak the name of the contact you want to call or the voice command to control the phone functions. ( Make a call using voice recognition) LOW/ MID/ FULL: Shows the strength of the battery. NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current received signal. Indd 15 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 15 19/11/2014 4:43:35 PM BLUETOOTH® Settings in memory Store a contact in memory You can store up to 6 contacts into the number buttons (1 to 6). 2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then press the knob. If a contact is selected, press the volume knob to show the phone number. To erase a contact from the preset memory, select [NUMBER DIAL] in step 2 and store a blank number. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. To return to the previous setting item, press 4 Press and hold . default: XX BT MODE PHONE SELECT AUDIO SELECT DEVICE DELETE PIN CODE EDIT (0000) Selects the phone or audio device to connect or disconnect. € You can only connect another Bluetooth device by disconnecting the connected Bluetooth device first. * * 1 Turn the volume knob to select a device to delete, then press the knob. ON: The unit automatically reconnect when the last connected Bluetooth device is within range. ON: The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/ Android device) when it is connected through USB input terminal.  Depending on the operating system of the connected device, this function may not work. Indd 16 15/10/2014 12:09:49 PM BLUETOOTH® Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. [. . . ] € Warm the surface of the windscreen with defroster if it is cold (during winter). Clip (F) 3 Remove the separator (tag 1) of film antenna (E) horizontally and paste the antenna on the windscreen. Front pillar • Install the amplifier unit (F) above the air bag so that it does not obstruct the operation of the air bag. (F) Antenna installation 1 Remove the front pillar cover of your car. [. . . ]